adjustable square column buckle​

- Jan 26, 2021-

New adjustable reinforcement and square column fasteners-adjustable square column buckle


1. First, the square column template is docked once (pay attention to the matching of the slot interface (interface) during the docking process), and the template will be connected to the square column auxiliary bracket once (make sure that the auxiliary brackets are in the same plane, and ensure the level of the hoop in the next step. ).

    The square column reinforcement part is a special custom reinforcement hoop corresponding to the fixed square column template. The shape consists of four elbow single galvanized clamping plates. One end of the clamping plate is arranged in a curved structure, and a plurality of fixing holes with the same interval are arranged along the length direction of each clamping plate. The wedge-shaped fixing pin passes through the through hole and the fixing hole to fix the limit sleeve and the clamping plate, forming a square column template fastener that is convenient to install and disassemble. The square column template is docked at one time.


    2. The tail ends of the four pieces first pass through the bending space at the end of the adjacent hoop in turn, while ensuring that the bending space of each clamp is attached to the end of the other clamp. The inner edge of the ring placed on the auxiliary bracket needs to be close to the outer edge of the square column template. Measure the distance between the clamps, and perform the next reinforcement of the stirrup in the above sequence. When the simple storage of the square column reinforcement needs to be disassembled, the fixing pin is pulled out, the limit sleeve is removed, the two card boards are naturally separated, and the edge of the card board is folded (meaning: a part of the folded object) can be completed. The utility model has simple operation and strong practicability. The adjustable square column template is suitable for square column templates of different sizes, and the adjustable square column template can be used for the construction of columns with different diameters. The fixing pin is pulled out, the limit sleeve is removed, and the two card boards are naturally separated. The utility model has simple operation and strong practicability. The reinforced part of the square column is composed of four adjustable bending plates and four inclined irons. In modern construction projects, new building materials that can be adjusted to reinforce square columns are very suitable for column template reinforcement.

d96221efc9274647b5a122ab0123583b

    Especially with the increase in the demand for high-rise buildings, the new square-pillar reinforcement gradually replaced the traditional formwork reinforcement method and became a necessary new building material in construction projects. Save materials and ensure quality. The square column reinforcement can only be installed horizontally during installation to achieve excellent reinforcement effects. When installing, use tape to measure the height line of the same height, and then install the four splints of the square column reinforcement on the same height line. Then insert the wedge with a hammer, and fix the wedge with a hammer. Compared with the traditional formwork reinforcement method, the new formwork has sufficient strength and rigidity. Simple structure and convenient operation. The adjustable square column template is suitable for square column templates of different sizes, and the adjustable square column template can be used for the construction of columns with different diameters. The fixing pin is pulled out, the limit sleeve is removed, and the two card boards are naturally separated. The utility model has simple operation and strong practicability. The materials required for the reinforcement of the new square column are composed of single curved plates, inclined iron and auxiliary supports. The modular component combination structure is simple and fast, which improves efficiency.