Safety Operating Regulations for Nail Making Machine

- Apr 02, 2021-

Safety Operating Regulations for Nail Making Machine

high speed making machine

  1. Strictly implement technical regulations, do not violate regulations, ensure safe production, and understand the principle, structure, performance, and use;


   2. Lubricate each lubrication point, no less than 3 times per shift, and check the lubrication condition of each transmission part frequently;


   3. Before starting the equipment, turn the flywheel by hand for a full circle, and make sure that there are no obstacles, fasteners, looseness and unsafe hazards before connecting to the power supply;


   4. After starting, the standby device must be in normal operation before turning the wire-in handle to make nails, and the wire-in should be stopped first when parking;


   5. During normal production, always check the nail quality, length, straightness, nail cap, nail tip, nail knife and nail mold wear;


   6. During the operation of the machine, attention should be paid to the temperature rise changes of the friction parts and the occurrence of abnormal noises at all times;


   7. Do not adjust the workpiece while the machine is running;


   8. When the equipment is running, it is strictly forbidden to touch the running parts of the transmission with hands; it is strictly forbidden to brake the flywheel by hand when parking, and it is strictly forbidden to stop the punching slider at the top dead center, so as to avoid the stuffy car;


   9. When repairing equipment or electrical appliances, first disconnect the power supply and hang up the sign of "If someone is working, it is strictly forbidden to switch on" before overhauling;


   10. Keep the machine clean and tidy, and the nail molds should be cleaned frequently, do not use raw embroidery thread to make nails, and keep the nail knives sharp;


   11. Do the daily maintenance and maintenance of the equipment according to the regulations; be tidy, clean, lubricated and safe;


   12. Do not drive with the protective cover removed.