Inverted wire drawing machine is a non sliding way to draw medium and low carbon steel wire, stainless steel wire, special-shaped steel wire and non-ferrous metal thick and medium diameter equipment developed, suitable for standard parts industry, supermarket shelf manufacturing industry, steel wire processing enterprises.
The inverted wire drawing machine is mainly composed of frame, reducer, drum, wire rack, trolley, pneumatic system, AC frequency control system and motor. The reel is inverted at the lower part of the reducer, and the drawn wire can be directly retracted to the wire dropping frame, so as to realize the rewinding of the large coil.
The transmission system of the inverted drawing machine adopts the first-class strong narrow V-belt combined hard tooth surface reducer or swing ring reducer; the take-up reel is heavy; the drum is forced air-cooled; the pneumatic pressure wheel; the winding coil is self powered and the diameter of the lower coil is adjustable; AC frequency conversion speed regulation is adopted; the machine is easy to operate, safe and reliable, and can save more than 30% energy.
The motor in the inverted wire drawing machine is driven by the belt pulley and three-stage gear to drive the drum on the output shaft of the reducer to rotate and draw the wire rod. After drawing and drawing, the wire rod is led into the wire laying frame through the lead roller, and the wire laying frame and the drum rotate synchronously.
The handstand drawing machine is highly automatic and can draw and take up wire at the same time. The take-up reel can be up to 2 tons, easy to unload, easy to operate, high production efficiency, safe and reliable; it can be in positive and reverse direction, and can be out of control when the whole machine is running, so as to avoid accidents caused by misoperation; the appearance is neat and beautiful.