Nail making machines are not ready to use when you buy them. Some adjustments must be made. I will introduce you to the status of adjustments below.
Adjustment of punching needle organization: First loosen the nut to adjust the adjustment block to a proper position. After adjustment, tighten the nut to avoid loosening, loosen the nut to loosen the pin, and rotate the punch nut to make the punch After the needle reaches the limit position, it can be maintained within the thickness range of the nail cap made between the nail and the nail clamp, and then tighten the nut to make the pin clamp the needle nut to avoid loosening.
This is the adjustment of the nail making machine, and the relative adjustment should be carried out according to the production and manufacture of nails of different models and specifications.