IRON NAIL MAKING MACHINE

1.curently, most nail factories are troubled with the poor quaity products such as unevenness nail length, nail head deviation, regular sizeof nail head, crooked nail etc., n addtion,the nails quality highly rely on the skilful workers, while many nail manufacturers can't findenough skillful workers, besides, the salary of skillful workers is much higher than common workers.
2.our high speed nail making machine can ensure that every nail is a good product,no defective nail produced. Owe to this advantage.there won't be jam or pause when nail coiling.As you may know if there are defective nals, the coil nail collaor will have to pause/stopand your workers need to deal with the defective nails.

3.This machine is used for producing various kinds of nais, such as coil nails, paper tape colilted nai, common nails, wire nails, steel nals,iron nails etc.,

4.The machine is equipped with special setting mechanism which is used to make sure that the nail head features good stability completelyround and regular, in this manner to eliminate the defective ie., fsh tail, crooked n ail, etc., which greatly rouble the nall manufacturers;
5.our wire pay-off stand is also diferent with the common nail making machines .lts an active wire pay-of.There is a motor on it, which canactively feed the wire to nail making machine. Other wire pay-off stands are rely on the nail machine's pull force to feed the wire, and thiswill cause the nail length problem and also limit the max load.The max load of our wire pay-offis 1.2 tons to 1.5 tons, whileothers is onlyabout 50Okgs. Your workers no longer need to frequently change the wire rod . This also improve your production efficiency and reduceyour labor cost.
6.our machines have many other core technologies, which allow us to supply high quality machines at compettive price.

Unique patent, two-time heading, double-dies and double-punches structure

Bigger nail heads can be easily gotten

Nail heads are always very round and in the center.

Nail head without knock marks, consistent and good looking

Uniform thickness of the nail cap diameter.

Hollow design nail clamping dies, no small head, no ash blocking

Nail cutter holder adopts pendulum structure

1. shorter stroke and lower mechanical wear

2. High precision, nail cutters work without touch with longer service life.

3. One set of cutters’ cutting times up to 10 million times

Feeding and anti-backing structure

High-precision feeding unit. Length difference can be controlled within 0.3mm

Unique wire feeding and retreating combination, each nail through the wire feeding, cutting, wire retreating, three mechanical action, the nail will be completely separated from the nail shank to ensure quality.

Main 

Features

Q: what's the packing of the machine?

Q:What parameter is necessary?

A.The wire diameter,mesh size,mesh width ect are mainly needed, detailed information would be appreciated, Special requirement can be discussed.