Advantages of performance and structure
1.The main features of this machine are simple structure, good rigidity, convenient use and low maintenance cost. The straight-shaft cam and the crankshaft are linked with synchronous belts, so the machine is easy to adjust and low in maintenance cost
2.The cutters and gripping dies are designed according to the cam lever principle, which is simple and reliable with stable accuracy control.
3.The double punch structure is used for gripping dies to ensure the concentricity of the nail head and the bigger diameter ratio of the nail shank and nail head.
SPECIFICATIONS FOR SSS-ZDJ-D90 CLIPPED HEAD NAIL MAKING MACHINE
Nail Maximum Diameter
Nail Minimum Diameter
Nail Maximum Length
Nail Minimum Length
1.Shorter stroke (12mm), traditional machine around 100mm
a.Stable performance, defective rate less than 1/100000
b.Lower mechanical wear
c.Gripping dies and punches are more durable.
2.The nail length can be well controlled.
a.The machine equipped with sensor for detecting longer or shorter nails
b.Active wire feeding, can ensure straight shank and consistent length, no matter what the wire coil's weight is.
3.Metal scraps can be separated with nails very well
a.Effectively protect the nail conveying belt
b.Ensure the good shape nail head
4. High quality nails: consistent nail head and shank length (tolerance 0.5mm), defective rate 1/100000, which is very good for coil nail collating and strip nail making.
5. Easy operation and high efficient: the machine is fully automatic and runs stably.
6. Low use-cost and tooling cost.
7. Automatic oiling system with oil pump
8. With seven alarming sensors to protect the machine and ensure the nail quality
9. Low maintenance cost
10. Save energy and labor cost
Name: Nail blade holder
uses the pendulum structure:
①Short distance,low mechanical wear
②High precision, nail cutter works without touch, low tool wear.
③More than 10 million times of single-blade shear, more time-saving and labor saving.
Name: Dual-mode double-punch
①Nail head can be punched well even the shank is uneven.
②Big nail head.
③Nail head with out knock marks to ensure consistency.
④Uniform thickness of the nail cap diameter.
⑤Hollow design nail die,no small head,no ash blacking,no clip crumbs,no cracking,no frequent dies demolition.
Name: Feeding and rewinding structure
①High - precision feeding device. The error of each nail length is controlled within 0.3mm
②Unique wire feeding and retreating combination, each nail through the wire feeding, cutting, wire retreating, three mechanical action, the nail will be completely separated from the nail shank to ensure quality.
SSS HARDWARE INDUSTRY CO.,LTD was founded in 2005,specializes in nail making machine ,high speed nail making machine, wire collating machine,thread rolling machine, ,nail polishing machine,wire drawing machine,Staple Nail Making Machine and related products such as nail,staples,welding wires,thread rods,pneumatic tools,building hardwares. Our factory covers an area of 60000 square meters and owns 300 sets of equipment.We are supported by seven branch work plants to ensure our good quality and prompt delivery.
Quality is our priority and your satisfaction is what we are striving for.Our products are very-&popular in Germany,France,Italy,UK,Turkey,Poland,Slovenia,Bulgaria,Belarus,Serbia,Russia,Canada,America,Mexico,Brazil,
Argentina,Vietnam&Korea.You can totally rest assured of our guaranteed quality and our good after-sales service.
Packing & Delivery
The normal package is wooden box. If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.
1. Time for changing nail sizes
----> If only adjust the length of nails and keep the same wire diameter. 3-5 minutes is enough. If the nail diameter also need to be changed, then around 20 minutes will be needed for adjusting the feeding unit and gripping dies.
2. The lifespan for nail cutters, gripping dies and punches.
----> Normally two months. It depends on the operator’s proficiency
3. The material for nail cutters, gripping dies and punches.
----> Tungsten Carbide with alloy steel.
4. If there is some problems during machine running, what technical support can be provided?
----> Video technical support and online service can be provided.
5. The tolerance for nail length
----> ± 0.25mm.
6. Installation service
----> We can send engineers to your company for machine installation. The round trip flight tickets, local transportation, local accommodation should be paid by your company. Engineer service charge is US$100/day.