Nails making machine
Mob/Whatsapp: +86 180005655162
Compared with common machine, ours has below advantages mainly:
1. defective rate is below 1/100,000;
2. 1 worker can operate 10 machines at same time and skillful worker is not need because of easy operation & maintain;
3. labor cost saved 50% - 70% for nail making;
4. labor cost saved 35% - 45% for coil nail making;
5. us$18 can be saved to produce 1 ton nails (in China);
6. high pressure air pump is not needed;
7. spare parts have long service life with low prices.
Unique patent, twice stamping
1.Nail head can be punched well even the shank is uneven.
2.Big nail head.
3.Nail head with out knock marks to ensure consistency.
4.Uniform thickness of the nail cap diameter.
5.Hollow design nail die,no small head,no ash blacking,no clip crumbs,no cracking,no frequent dies demolition.
Nail blade holder uses the pendulum structure
1.Short distance,low mechanical wear
2.High precision, nail cutter works without touch, low tool wear.
3.More than 10 million times of single-blade shear, more time-saving and labor saving.
Feeding and rewinding structure
1.High - precision feeding device. The error of each nail length is controlled within 0.3mm
2.Unique wire feeding and retreating combination, each nail through the wire feeding, cutting, wire retreating, three mechanical action, the nail will be completely separated from the nail shank to ensure quality.
Wear Parts & Spare Parts
Packaging & Shipping
The normal package is wooden box.
If export to european countries,the wooden box will be fumigated.
If container is too tigher,we will use pe film for packing or pack it according to customers special request.
Normally the machines are shipping by sea or by railway or by truck.
In order to guarantee the customers are able fully to operate the machine, if the customers need, we can help customer as below:
(1) Correct operating mode (2) Correct maintenance way (3) Remove simple problem
(4) Training how to instal the machine, training how to use the machine.
(5) Engineers available to service machinery overseas.
Q: what's the packing of the machine?
A.In wooden pallet, In plastic film, the spare parts and cabinet packed by wooden box.
Q: What's the payment term? A.Usually by T/T ( 30% in advance, the balance against the copy of B/L),or L/C at sight.
Q: Can I change the motor as my local voltage?
A.We can change the voltage as your requirement, and there's no extra charge.
Q: How do your control quality? A.We have an inspection team to check the products at all stages of the manufacturing process.
Q:What parameter is necessary?
A.The wire diameter,mesh size,mesh width ect are mainly needed, detailed information would be appreciated, Special requirement can be discussed.
Nails making machine
Sales manager SSS HARDWARE INDUSTRY CO., LTD.
Tel: +86-551-82819016 Fax: +86-551-82819019
Skype: Remon Zhang Mob/Whatsapp: +86 18005655162