High speed nail making machine
High speed nail making machine is different from traditional nail making machine, it can install the Nail counter to calculate the nails quantity, and also its max speed can reach 800pcs/min. The nails(nails caps, nails point) produced by high speed nail making machine adopts the method of one time forming in mould, which make the nails very good quality very good, and also its shape is more neat and beautiful.
With the development of society, high speed nail making machine technology is more mature, easy operation, labor saving, less land occupation, which greatly reducing production costs and increasing production efficiency. one high speed nail making machine capacity is same as around 8-10 sets common type nails making machine. In China, recently many nails factory buy the high speed nail making machine replace the traditional nails making machine.
Machine speed are adjustable,controlled by PLC and frequency converter.
Simple structure in linear type ,easy in installation and maintation.
Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
High pressure double crank to control the die opening and closing.
Running in a high automatization and intellectualization,no pollution
Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .
1. Long-service life : No less than the common nail making machine, for at least seven years. White belt at low cost and long life which is 5-6 months without an incorrect operation.
2. Automatic oiling system : Few lubrication points, much less than normal machines and other nail making machines on market. It is still very tidy when operating.
3. High output, take specification 2550(D-2.5mm* L-50mm) for example, the capacity is about 750 kg / 8 h.
4. Low Maintenance cost : no dismantle if not change nail mold specifications which can work for 3 months. Punch time is five times than ordinary equipment depending on the actual using status. The upper and lower nail cutters do cutting without touch, cutting times can reach at least 8 million (8,000,000 is the cutting times of wire diameter 2.0mm, rough wire diameter will be multiplied); low consumption of nail molds, no crack, no fixed mold raw wear, no mold clogging, a single pair of nail mold can cut at least 50 million times, punching is more than 25 million times. Nail cutter, nail mold, punch can be repaired for many times at the same cost compared with general equipment.
5. Super energy-saving: actual power consumption of High- speed nail making machine is around 3.5KW. Compared to the normal nail making machine, this machine can save electricity around 30 degrees per 1 ton nails output.
6. Easy operation and high efficient: one person can operate at least 6 machines at the same time. 60% labor cost saving because of its high efficiency. Coiling nails efficiency gains at least 50% with a high-frequency welding machine as each nail is quality product without stuck and stop, even if in the speed of 1900 nails/min, coiling speed can improve 30%, so that can reduce 40% labor cost.
7. High quality nails: Detective rate is very low, which is 1/100000, improve the efficiency of coil nail collating and paper strip nail making machine, far different from traditional nail making machine which detective rate is high (3%) and hard to control.
Unique patent, double-punch
Nail head can be punched well even the shank is uneven.
Big nail head.
Nail head without knock marks to ensure consistency.
Consistent nail head.
Hollow design nail die, no small head, no ash blacking, no clip crumbs, no cracking, no frequent dies demolition
Nail blade holder uses the pendulum structure
Short distance, low mechanical wear
High precision, nail cutter works without touch, low tool wear.
More than 10 million times of single-blade shear, more time-saving and labor savinContact us
Sales Manager: Remon Zhang SSS HARDWARE INDUSTRY CO., LTD.
Mob/Whatsapp: +86 18005655162
Skype: : Remon Zhang( firstname.lastname@example.org)