Low Noise High Speed Automatic Nail Making Machine
This machine is a high-speed and energy-saving nail making equipment, mainly used to produce and process high-quality ordinary round head nails and D-shape clipped head nails with consistent shank length and head diameter for final products coil nails, plastic strip nails and paper strip nails.
≤ 800 pcs/min
≤ 760 pcs/min
≤ 680 pcs/min
≤ 700 pcs/min
1. The main features of this machine are simple structure, good rigidity, convenient use and low maintenance cost. The straight-shaft cam and the crankshaft are linked with synchronous belts, so the machine is easy to adjust and low in maintenance cost 2. The cutters and gripping dies are designed according to the cam lever principle, which is simple and reliable with stable accuracy control. 3. The double punch structure is used for gripping dies to ensure the concentricity of the nail head and the bigger diameter ratio of the nail shank and nail head.
Nail making processLow Noise High Speed Automatic Nail Making Machine
Wire straightening unit
Wire feeding unit
1. Easy operation, 20 minutes to change and adjust the cutters, gripping dies and feeding unit while changing nail shank diameter and length. 2. Simplified maintenance, automatic inside oiling system, no grease needed. 3. Very round nail head, two times punching to ensure very good nail heads. 4. Consistent nail shank length, good for making coil nails and paper/plastic strip nails. 5. 24 hours keep working without stop 6. Safe and less noise 7. Durable and cheaper tools, lower using cost. 8. Decrease your production cost
Nail cutter holder
1. shorter stroke and lower mechanical wear 2. High precision, nail cutters work without touch with longer service life. 3. One set of cutters’ cutting times up to 10 million times
Unique patent, two-time heading, double-dies and double-punches structure
1. Bigger nail heads can be easily gotten 2. Nail heads are always very round and in the center. 3. Nail head without knock marks, consistent and good looking 4. Uniform thickness of the nail cap diameter. 5. Hollow design gripping dies, no small head, no ash blocking
Wire feeding and anti-backing structure
1. High-precision feeding unit. Length difference can be controlled within 0.3mm 2. With unique wire feeding and anti-backing structure, the nail scraps can be completely separated from the nail shank to ensure nail quality.
Polywood case packing.Low Noise High Speed Automatic Nail Making Machine
SSS HARDWARE INDUSTRY CO.,LTD was founded in 2005,specializes in nail making machine ,high speed nail making machine, wire collating machine,thread rolling machine, ,nail polishing machine,wire drawing machine,Staple Nail Making Machine and related products such as nail,staples,welding wires,thread rods,pneumatic tools,building hardwares. Our factory covers an area of 60000 square meters and owns 300 sets of equipment.We are supported by seven branch work plants to ensure our good quality and prompt delivery. Quality is our priority and your satisfaction is what we are striving for.
●Technical advantages: Professional R&D team
●New product development advantages: Focus on product research and development, and constantly develop new styles, add new product functions.
●Customized advantage: Products can be customized according to customers' requirement.
●High quality and on-time shipment
●24-hour online service
●20-year production and export experience
1. Time for changing nail sizes ----> If only adjust the length of nails and keep the same wire diameter. 3-5 minutes is enough. If the nail diameter also need to be changed, then around 20 minutes will be needed for adjusting the feeding unit and gripping dies. 2. The lifespan for nail cutters, gripping dies and punches. ----> Normally two months. It depends on the operator’s proficiency 3. The material for nail cutters, gripping dies and punches. ----> Tungsten Carbide with alloy steel. 4. If there is some problems during machine running, what technical support can be provided? ----> Video technical support and online service can be provided. 5. The tolerance for nail length ----> ± 0.25mm. 6. Installation service ----> We can send engineers to your company for machine installation. The round trip flight tickets, local transportation, local accommodation should be paid by your company. Engineer service charge is US$100/day.