For the nail industry, output and cost are closely related.So the higher the volume, the lower the cost.But at some point production is going to be high enough that the cost is not going to go down as fast because of the capacity problem in the local market.Nail-making plants are usually between 5 and 50 tons per day.The factory with its own coil nails can be larger.
Therefore, high-speed nail making, as the development direction of nail making machine, is always moving towards more problems, higher speed and more intelligent direction.
SSS Hardware Third Generation High Speed Nail Making Machine has been upgraded to an easy operation mode to reduce the labor cost of nail factory. It allow each operator can operate more than ten machines.
“Saving time, labour, power and space” is the creed of SSS Hardware Third Generation Super fast Nail Making Machine and we hope that consumers would like our nail-makers truly.
Nail dia. Range (mm)
Nail Length Range(mm)
Size of wire stand
1.Metal scraps can be separated with nails very well
a. The nail conveying belt is effectively protected.
b. Regular shape of nail head is ensured.
2.The nail length can be well controlled.
a. The machine equipped with sensors for detecting longer or shorter nails
b. Active wire feeding, can ensure straight shank and consistent length, no matter what the wire coil's weight is.
3.Shorter stroke (12mm), traditional machine around 100mm
a. Stable performance, defective rate less than 1/100000
b. Lower mechanical wear
C. Gripping dies and punches are more durable.
4.Only about 20 minutes is needed to change and adjust the cutters, gripping dies and feeding unit to change nail shank diameter and length.
5.Consistent nail shank length, good for making coil nails and paper/plastic strip nails.
6.Safe and less noise
7.Durable and cheaper tools, lower production cost.
8.Simplified maintenance, automatic inside oiling system, no grease needed.
9.Two-times punching ensures very round nail heads.
Machine certificates & patents
Puncher and Mould