An invention patent Two utility model patents
Nail Maximum Diameter
Nail Minimum Diameter
Nail Maximum Length
Nail Minimum Length
1.Long service life,no less than the traditional common nail making machine, for at least seven years.White belt at low cost and long life which is 5-6 months without an incorrect operation.
2.Automatic oiling , few lubrication points,much less than traditional machines and other nail making machines on market.It is still very tidy when operating.
3.High Production. Set specification 2550 as an example,about 750 kg / 8 hours.
4.No dismantle if not change nail mold specifications which can work for 3 months. Nail cutter 60 classes (8 hours / day, 2.5 wire diameter). Punch time is five times than ordinary equipment depending on the actual using status.
5.Nail cutter do cutting without touch, shear number can reach at least 800 million times (8,000,000 is the cutting times of wire diameter 2.0mm, rough wire diameter will multiplied);low consumption of nail mold, no crack, no fixed mold raw wear, no mold clogging, a single pair of nail mold can cut at least 50 million times, punching is more than 25 million times. Nail cutter, nail mold, punch can be repaired for many times at the same cost compared with general equipment.
6.Super energy-saving: actual consumption of High- speed nail making machine is about 3.5KW,1 ton nail output can save electricity about 20 degrees; while 2.5 sets of ordinary nail making machine consumption is 5-6KW due to long slide stroke and multi sliding friction parts
7. 60% labor saving because of its high efficiency. Coiling nails efficiency gains at least 50% with a high-frequency welding machine as each nail is quality product without stuck and stop, even if in the speed of 1900 nails/min, coiling speed can improve 30%, so that can reduce 40% labor cost.
(1)Unique patent, twice stamping
1.Nail head can be punched well even the shank is uneven.
2.Big nail head.
3.Nail head with out knock marks to ensure consistency.
4.Uniform thickness of the nail cap diameter.
5.Hollow design nail die,no small head,no ash blacking,no clip crumbs,no cracking,no frequent dies demolition.
Nail blade holder uses the pendulum structure
1.Short distance,low mechanical wear
2.High precision, nail cutter works without touch, low tool wear.
3.More than 10 million times of single-blade shear, more time-saving and labor saving.
(3)Feeding and rewinding structure
1.High - precision feeding device. The error of each nail length is controlled within 0.3mm
2.Unique wire feeding and retreating combination, each nail through the wire feeding, cutting, wire retreating, three mechanical action, the nail will be completely separated from the nail shank to ensure quality.
Packaging & Shipping
In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:(1) Correct operating mode
SSS HARDWARE INDUSTRY CO., LTD.
specializes in staples, collated nails, welding wires and threaded rods. Our factory covers an area of 60,000 square meters and owns 300 sets of equipment. We are supported by seven branch work plants to ensure our good quality and prompt delivery.
1.INDUSTRIAL STAPLES, BRAD NAILS, COIL NAILS, PAPER STRIP NAILS, PLASTIC STRIP NAILS, DA NAILS, ST NAILS & DA NAILS
2.WEDLING WIRES FOR COIL NAILS, STAPLE WIRES, WIRE BANDS & WELDING WIRES
3.THREADED RODS, NUTS, BOLTS & WASHERS
4.AUTOMATIC NAIL MAKING MACHINE, NAIL THREAD ROLLING MACHINE, NAIL POLISHING MACHINE, COIL NAIL MAKING MACHINE & STRIP NAIL MAKING MACHINE
5.STAPLE MAKING MACHINE & BRAD NAIL MAKING MACHINE
Q: what's the packing of the machine?
A.In wooden pallet, In plastic film, the spare parts and cabinet packed by wooden box.
Q: What's the payment term?
A.Usually by T/T ( 30% in advance, the balance against the copy of B/L),or L/C at sight.
Q: Can I change the motor as my local voltage?
A.We can change the voltage as your requirement, and there's no extra charge.
Q: How do your control quality?
A.We have an inspection team to check the products at all stages of the manufacturing process.
Q:What parameter is necessary?
A.The wire diameter,mesh size,mesh width ect are mainly needed, detailed information would be appreciated, Special requirement can be discussed.