wire nail making machine manufacturer
Our machines' advantages:
1.Easy operation, 20 minutes to change and adjust the cutters, gripping dies and feeding unit while changing nail shank diameter and length.
2. Simplified maintenance, automatic inside oiling system, no grease needed.
3. Very round nail head, two times punching to ensure very good nail heads.
4. Consistent nail shank length, good for making coil nails and paper/plastic strip nails.
5. 24 hours keep working without stop
6. Safe and less noise
7. Durable and cheaper tools, lower using cost.
8. Decrease your production cost
|Nail dia.||1.8-3.0 mm||2.0-3.8 mm||2.0-3.5 mm||2.4-4.5 mm||2.5-5.0 mm|
|Nail le.||32-55 mm||45-90 mm||45-90 mm||70-130 mm||70-150 mm|
|Speed||≤ 800 pcs/min||≤760pcs/min||≤680pcs/min||≤680pcs/min||≤700pcs/min|
|Dim (mm)||1350*850*1170 |
|Weight||2200 kgs||2800 kgs||3000 kgs||3500 kgs||4500 kgs|
Unique patent, two-time heading, double-dies and double-punches structure
Bigger nail heads can be easily gotten
Nail heads are always very round and in the center.
Nail head without knock marks, consistent and good looking
Uniform thickness of the nail cap diameter.
Hollow design nail clamping dies, no small head, no ash blocking
Nail cutter holder adopts pendulum structure
1. shorter stroke and lower mechanical wear
2. High precision, nail cutters work without touch with longer service life.
3. One set of cutters’ cutting times up to 10 million times
High-precision feeding and unwinding structure to control the length error of each nail within 0.3mm
Feeding and anti-backing structure
1. High-precision feeding unit. Length difference can be controlled within 0.3mm
2. Unique wire feeding and retreating combination, each nail through the wire feeding, cutting, wire retreating, three mechanical action, the nail will be completely separated from the nail shank to ensure quality.