High Speed Nail Making Machine,
Item No.:SSS-ZDJ-X50, SSS-ZDJ-X90, SSS-ZDJ-X130, SSS-ZDJ-X150, SSS-ZDJ-D90
Defective Rate: Below 1/100000
Container Load If 20GP: 3 sets nail making machine
If 40GP: 7 sets nail making machine
Labor Demand: 1 worker can operate 10 machines
Features: Very easy to operate, A common worker can operate this machine after a simple demo. You no longer need to rely on well-trained skillful workers.
Compared to ordinary nail machines our high speed nail machine with these advantages
1. Labor cost saved by 50%--70% for nail making
2. Labor cost saved by 35%--45% for coil nail collating
3. $18.00 can be saved for 1 ton of nails (In China)
4. Don't need a high pressure air pump
5. Spare parts have long service life with cheap price
1.Long service life,no less than the traditional common nail making machine, for at least seven years.White belt at low cost and long life which is 5-6 months without an incorrect operation. 2.Automatic oiling , few lubrication points,much less than traditional machines and other nail making machines on market.It is still very tidy when operating. 3.High Production. Set specification 2550 as an example,about 750 kg / 8 hours. 4.No dismantle if not change nail mold specifications which can work for 3 months. Nail cutter 60 classes (8 hours / day, 2.5 wire diameter). Punch time is five times than ordinary equipment depending on the actual using status. 5.Nail cutter do cutting without touch, shear number can reach at least 800 million times (8,000,000 is the cutting times of wire diameter 2.0mm, rough wire diameter will multiplied);low consumption of nail mold, no crack, no fixed mold raw wear, no mold clogging, a single pair of nail mold can cut at least 50 million times, punching is more than 25 million times. Nail cutter, nail mold, punch can be repaired for many times at the same cost compared with general equipment. 6.Super energy-saving: actual consumption of High- speed nail making machine is about 3.5KW,1 ton nail output can save electricity about 20 degrees; while 2.5 sets of ordinary nail making machine consumption is 5-6KW due to long slide stroke and multi sliding friction parts 7. 60% labor saving because of its high efficiency. Coiling nails efficiency gains at least 50% with a high-frequency welding machine as each nail is quality product without stuck and stop, even if in the speed of 1900 nails/min, coiling speed can improve 30%, so that can reduce 40% labor cost.
≤ 800 pcs/min
The machine's main characteristics are as following:
1.Shorter stroke (12mm), traditional machine around 100mm
a.Stable performance, defective rate less than 1/100000
b.Lower mechanical wear
c.Gripping dies and punches are more durable.
2.The nail length can be well controlled.
a.The machine equipped with sensor for detecting longer or shorter nails
b.Active wire feeding, can ensure straight shank and consistent length, no matter what the wire coil's weight is.
3.Metal scraps can be separated with nails very well
a.Effectively protect the nail conveying belt
b.Ensure the good shape nail head
1) Dual-mode double-punch
2)Nail blade holder uses the pendulum structure
3) Feeding and rewinding structure
Name: Nail blade holder
uses the pendulum structure:
①Short distance,low mechanical wear ②High precision, nail cutter works without touch, low tool wear. ③More than 10 million times of single-blade shear, more time-saving and labor saving.
Name: Dual-mode double-punch ①Nail head can be punched well even the shank is uneven. ②Big nail head. ③Nail head with out knock marks to ensure consistency. ④Uniform thickness of the nail cap diameter. ⑤Hollow design nail die,no small head,no ash blacking,no clip crumbs,no cracking,no frequent dies demolition.
Name: Feeding and rewinding structure ①High - precision feeding device. The error of each nail length is controlled within 0.3mm ②Unique wire feeding and retreating combination, each nail through the wire feeding, cutting, wire retreating, three mechanical action, the nail will be completely separated from the nail shank to ensure quality.
Name:1) Installation Tool Box
3) Nail Making Dies.
Packing & Delivery
The normal package is wooden box. If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.