Overview
Staple production line totally has five machines: Wire drawing machine .Wire flattening machine, Wire gluing machine ,staple forming machine and packing machine . Our machine can produce different size of staple pin which is used for office and industry ( home decoration, furniture manufacturing, packaging, leather, shoemaking and other industries). The staple forming machine adopts a hydraulic system for implementation of components, with characteristics of safety operation, stable performance, low noise and high efficiency.
Machine line introduction
Description:
full automatic staple pins making and staples packing machine
This machine adopts the hydraulic system and uses the centralized control of the PLC microcomputer.
A. Suitable for 24/6, 26/6, B8, 10 series staple pins
B. Hydraulic pressure system is adopted in this machine instead of traditional heavy punching type.
C. PLC microcomputer centralized control
D. Advantages: High speed Safety operation Stable performance Low noise
Machine maintenance:
1. Die slider should add oil once per shift;2. Pneumatic triad oil cups should be filled with oil once every shift and the water in the cup should be drained;3. Screws for fixing the cylinder should be frequently checked and reinforced within a few weeks after the new machine is used;4. The reversing valve and overflow valve should be cleaned frequently when the new machine is used at the first stage;5. If any leak is found in the tubing, re-tighten or replace the O-ring;6. The water system of the cooler should be turned on before production every day. The water system should be turned off and the power switch must be turned off after working to clean the production site.
Technical parameter:
Model | SSS-FT180 | SSS-TJB-U25 | SSS-TJB-U60 | SSS-TJB-WJ24 | SSS-TJB-WJ25 |
Volt. | 220V/380V | 220V/380V | 220V/380V | 220V/380V | 220V/380V |
Power | 7.5KW | 7.5KW | 7.5KW | 7.5KW | 7.5KW |
Motor | 4KW | 4KW | 5.5KW | 5.5KW | 4KW |
Size | 120*130*155cm | 100x50x50cm | 125x130x165cm | 117x134.5x170cm | 120x130x155cm |
Capacity | 90-170 times/min | 80-170 times/min | 80-100 times/min | 100-140 times/min | 90-170 times/min |
Customer visit :
We have individule staple machineand the production line for customer needs. they are suitable for making various kinds of staple pins with galvanized round iron wire as raw materials. We can design staple pin making machine according to customer’s different requirements and the sample from our clients. The most difference between is the whole line is automatic and it can control the quality better , Meanwhile, the whole staple production line totally from raw material to final production not depends on some semi-products that would not be easy to purchase . All of our machines are equipped with a detachable safety cover and has stable performance, low noise, and high efficiency. And the key parts of the machine are made by high-quality steel or alloy steel, to make our staple making machine with a longer lifetime.
Our staple machine has already exported to many countries, such as United State, India, Russia, Nepal, Nigeria and so on. SSS Hardware industry always believe that the machine quality and continuous service is the most important thing. Due to the investment in equipment is one-off, but the quality is directly affected on customer's profit. So we try our best to supply each customer the good quality equipment and help them to solve every problem.
Contact us: