Brief Introduction:
Making process: Raw material (galvanized wire) ------->Wire flattening ------->Wire gluing combiner ------->Staples making machine.
1. Hydraulic Pressure Staple/Staple Pin Making Machine
To press and form the wire band to the final product staples/staple pins
Feature:
This machine has abandoned the traditional heavy punch press, adopting the hydraulic system as the executive part, utilizing the PLC system, which has the characteristics of safe operation, stable performance, low noise and so on. Compared with the traditional punch machine, the speed is greatly increased.
2. Wire gluing combiner
Use glue to combine the single wire to suitable width wire band
Feature:
This group of machines including wire pay-off rack, front and rear leveling correction equipment can straighten and glue the wires automatically with automatic drying oven.
Main parameters:
Item | Unit | Type: SSS-JX150 | |
Speed | m/min | 0-13 | |
Width of wire plate | mm | 50-130 | |
Thickness of wire plate | mm | 0.5-1.35 | |
Overall dimensions | Length | mm | 24000 |
Width | mm | 1500 | |
Height | mm | 1500-1700 | |
Motor power | kw | 2.2-3 | |
Weight | kg | 1100 |
3. Wire flattening machine:
To flat the round galvanized wire to flat wire with suitable thickness.
Feature:
This flattening machine adopts carbide pinch wheel with high hardness and shining surface, which can ensure the precise flattening thickness. The whole operation is started with only one button. And the stepless speed change meets the technical requirements of production capacity.
Main parameters:
Item | Unit | Type: SSS-YB200 | |
Speed | m/min | 0-350 | |
Wire flattening thickness | mm | 0.4-1.4 | |
Tolerance | ±mm | 0.01 | |
Overall dimensions | Width | mm | 1500 |
Length | mm | 2000 | |
Height | mm | 1750 | |
Motor | Kw | 3 | |
Weight | Kg | 750 |