straight line wire drawing machine manufacturer
Machine Layout:
Straight Line Wire Drawing Machine are suitable for the high & low carbon steel wire below size of 14mm,with Siemens PLC & inverter control system to assure high speed & stable operation.
Low Carbon steel wire product used in mesh net, steel fiber, nail & staple making, construction, agriculture & furniture field, etc. And other steel wire product used in prestressing wire, PC wire, spring, steel rope wire, steel cord & Bead wire for tyre, etc.
Steel in coil →Pull up wire rack→Derusting machine→bepowder→Straight Line Wire Drawing Machine→Automatic take-up
Main Technical Parameter
Type | 300 | 350 | 400 | 450 | 500 | 560 | 600 | 700 | 800 |
Material Intensity | ≤1250Mpa | ||||||||
Drawing Passes | 2 ~ 11 | 2 ~ 11 | 2~ 11 | 2 ~ 12 | 2 ~ 12 | 2 ~ 12 | 2 ~ 12 | 2 ~ 9 | 2 ~ 9 |
Max. Dia. Of Inlet Wire | 2.8mm | 3.5mm | 4.2mm | 5.0mm | 5.5mm | 6.5mm | 8mm | 10mm | 12.7mm |
Min. Dia. Of Outlet Wire | 0.5mm | 0.6mm | 0.75mm | 1.0mm | 1.2mm | 1.4mm | 1.6mm | 2.2mm | 2.6mm |
Max. Speed Of Drawing | ~ 25m/s | ~ 20m/s | ~ 20m/s | ~ 16m/s | ~ 15m/s | ~ 15m/s | ~ 12m/s | ~ 12m/s | ~ 8m/s |
Drawing Power (KW) | 7.5~18.5 | 11~22 | 11~30 | 15~37 | 22~45 | 22~55 | 30~75 | 45~90 | 55~110 |
Main Technical Parameter
straight line wire drawing machine manufacturer
Name | Model | Range of Dia. |
Discharging Machine | ||
Pointing Machine | F-96 | 6.5-2.0mm |
Pointing Machine | F-80 | 3.5-1.0mm |
Butt-Welding Machine | UN-10 | 8.0-2.0mm |
Butt-Welding Machine | UN-3 | 6.5-2.0mm |
Butt-Welding Machine | UN-1 | 3.5-1.0mm |
Automatic Discharging Machine | XB-600 | capacity 800kg |
Automatic Discharging Machine | XB-360 | capacity 400kg |
I Type Spool Reeling Machine | SG-800 | capacity 800kg |
I Type Spool Reeling Machine | SG-630 | capacity 500kg |
Descaling Machine | SW650 | |
Motorless Descaling Machine | with steel brush | |
Well Type Furnace | RJ-90-9 |
Pointing Machine
The Pointing machine is the mechanical equipment of the metal wire drawing machine and the cold drawing production equipment. The end of the raw wire needs to be narrowed by the pointing machine and then pass through the drawing die hole before drawing the wire. The pointing machine is used for tipping of metal wire rods and pulling heads. Wire pointing operation before drawing.
Automatic Take-up Machine
Diameter of Wire Reeling Device (mm) | 400-550 |
Speed (m/min) | 5-50 |
Motor Power (kw) | 0.75kw -3kw *qty of rolling drum |
Wire Diameter Range | 4-1. 6m m |
straight line wire drawing machine manufacturer
1 | Wire drawing drum material | Cast steel, tungsten coating and surfacing, HRC60. Roughness is less than 0.8umm |
2 | Drum cooling | 1. Drum inside cooling: drum’s inner wall has 3 water channels which displayed in 120 degrees direction by water spraying. |
3 | Die box cooling way | The drawing die is cooled by using direct water inlet and outlet water, and the cooling effect is especially good |
4 | Tension machine | Built-in |
5 | Main frame | Steel plate and square tube welding |
6 | Safety device | Safety protection cover, broken line stop test |
7 | Vacuum design | Vacuum cleaning hole |
8 | Lighting | Each machine is equipped with separate lighting |
9 | Parking brake | Pneumatic brake |
10 | Electric cabinet | Protection level IP54 |
11 | Electrical system | Machine distribution structure, PROFIBUS-DP field bus control |
12 | Energy consumption | Monitoring is equipped with electricity meter |
13 | PLC | HUICHUAN (Inovance) brand |
14 | Touch screen | HUICHUAN 10inch screen |
15 | Frequency motor brand | Fangda |
16 | Low voltage apparatus | Zhengtai |
17 | Inverter | HUICHUAN (Inovance) brand |
18 | Sensor | OMRON |
19 | Field cable supply | The dedicated control line is provided by the seller, and other control cables and power cables are provided by the buyer |
straight line wire drawing machine manufacturer
Contact us:
Samuel Jiao
Email: samuel@3shardware.com
WhatsApp: +8618949200153